7
Instructions for Use
1. Ensure that the unit is unplugged before filling with water. Fill with warm
water to the fill line located on the inside side of the tub (See Figure 1).
Do not fill higher than fill line.
NOTE: The heat option will help
maintain the temperature of water placed inside this foot bath. It will
not heat cold water. For a warm water massage, fill the unit with
warm water.
2. Plug the unit into a 120 volt household outlet.
3. With the touch of your toe, press the control button once to choose
Bubbles/Heat. Press the button again to choose Massage/Bubbles/Heat.
Press the button a third time to turn off foot bath.
4. Sit down and place your feet in the spa.
5. To use the pedicure center:
a.
With your thumb and forefinger, remove the cap located on the
center post.
b.
Select desired attachment:
Pumice Stone:
To smooth and soften dry skin on heels to the
balls of your feet
Brush:
Use to clean and exfoliate skin
Massage Rollers:
Enjoy a relaxing massage from your heels to
the balls of your feet
c.
Simply place new attachment on the center post.
d.
Push down with your foot to activate new attachment.
6. To use the infrared function press with your toe once to turn on. Press
again to turn off. Infrared is located on the splash guard.
7. If preferred, you can insert the rollers into the base of the foot bath
(See Figure 1). Then, enjoy a deep penetrating massage by sliding feet
back and forth over the reflex rollers. Rollers are removable- pull the
rollers up and remove the entire roller holder.
8. To empty: First, unplug the unit. Tip the unit, allowing water to spill out
along the drain spouts. Never pour water over the control switch located
at the ON/OFF Button. (See Figure 1).
Foot Salon Deluxe Features
•
Double the bubbles
•
Infrared heat
•
Toe touch activated controls
•
Massaging Rollers stimulate the soles of your feet
•
Acupressure surface with pressure points to massage feet
•
Soothing heat helps maintain warm water temperature
•
Three custom pedicure attachments - massage rollers, brush and
pumice stone
Maintenance
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a
soft, damp cloth and mild cleansing agent.
• After cleaning, wipe surfaces with a dry cloth.
• Never use strong abrasives, detergents or cleansing agents.
• Periodically straighten cord if it becomes twisted.
To Store
Unplug the appliance from the outlet and allow to cool.
• Store in its box or a clean, dry place.
• To avoid breakage, do not wrap the power cord around the unit.
• Do not hang the unit by the power cord.
Figure 1
DO NOT FILL WATER OVER THE FILL LINE
FILL LINE
DRAIN
SPOUTS
CONTROL
BUTTON
INFRARED
BUTTON
ROLLERS
6
PEDICURE
CENTER
PB-100 SP/ENG 8/27/02 11:09 AM Page 7
