6
7
Instructions for Chime Use
1. First press the “O” button on the control panel
to turn chimes on.
(Figure 5)
The Active Mode
Indicator will illuminate to indicate that it is on.
NOTE: Once the chimes are turned on, the
fan will operate on and off to simulate the
randomness of natural wind. The random
length and frequency of the fan will allow the
chimes to create everchanging tones for a
peaceful and harmonious environment.
2. Press the “+” or “-” buttons on control panel to
increase or decrease the amount of time (fre-
quency) between the chimes.
(Figure 5)
3. Press the “O” button again to turn off the
chimes. The Active Mode Indicator will no
longer be illuminated, indicating that it is off.
NOTE: The chimes have an auto shut off feature
and will stop chiming after 60 minutes.
Figure 3
Figure 4
00
-
+
Figure 5
On/Off
Decrease Increase
Figure 2
Assembly Instructions
1. Unpack the product.
(See Figure 1 for contents)
2. This unit is powered by an AC adapter, which is included.
The chimes and clock will ONLY operate if the adapter is
used.
3. The battery compartment is designed only to provide
MEMORY BACK-UP for the clock and alarm settings. 2 “AA”
alkaline batteries (not included) should be inserted into the
compartment if memory back-up is desired (in the event of
power outages or if unit is unplugged). However, the time
will not be illuminated on the clock display. As soon as the
power supply returns, the display will indicate the correct
time.
NOTE: Batteries must be installed in order for clock memory
back-up to operate. In the event of a power failure or
disconnection, if batteries are not installed, the clock and
alarm will need to be re-set when power is restored.
4. To connect AC adapter, connect the receptacle end to the
bottom of the unit then insert the adapter plug into a 120V
household outlet.
(Figure 2)
5. To install batteries, remove compartment cover by pressing
on the tab and pushing down in the direction of the “open”
arrow. Insert 2 “AA” alkaline batteries into the compartment
on the bottom of the unit following the diagram.
(Figure 3)
Replace cover and snap into place.
NOTE: It is recommended that the batteries remain
installed while the adapter is being used. This unit has a
battery back-up memory saving feature that saves the
time for the clock and alarm settings. If you wish to
unplug the unit this feature will only work if the batteries
are installed. If you wish to change the batteries this fea-
ture will only work if the adapter is plugged in.
6. To hang chimes, line up the 3 hooks on the top of the
chimes with the holes on the underside top of the stand.
(Figure 4)
Insert and twist to secure in place.
Figure 1
Base
