4
A
B
E
C
D
F
G
H
I
J
Assembly and Instructions for Use
Unpack the product. Be sure that all parts listed are included.
Familiarize yourself with the WATER PUMP (D) before completing
assembly of fountain.
It is recommended the WATER PUMP be set at its highest
speed during assembly and later adjusted to a lower setting if desired.
Be sure to unplug the WATER PUMP before adjusting the speed setting.
The WATER PUMP speed is controlled by the switch located at the front of the
WATER PUMP (Figure 1). The speed is indicated by a plus (+) and minus (-) sign.
To increase the speed, move the switch slowly in the direction of the plus sign. At its
highest speed level, the switch will not move any further. To decrease the WATER
PUMP speed, move the switch toward the minus sign. Similarly, at its lowest speed,
the switch will not move any further. Once you are familiar with the WATER PUMP,
begin assembly.
1. Insert the black connector at the bottom of the WATER TUBE (C) into the round
opening of the WATER PUMP (D). (Figure 2)
2. Set waterproof LIGHT BULB (E) into seat in center of FOUNTAIN TOP (B) (Figure 3)
Warning: Bulb gets very hot. Allow to cool completely before touching.
Attention:
In order to get best
results, please
operate pump
completely
submerged.
Keep the water
level above the
minimum water
level ALL THE TIME.
Figure 1
Minimum Water Level
Flow Control Lever
(+) faster water output
(-) slower water output
D
C
5
Figure 2
Part
A
B
C
D
E
F
G
H
I
J
Description
Mosaic Globe
Fountain Top
Water Tube (attached to B)
Water Pump (attached to F)
Light Bulb (attached to B)
Fountain Base
Power Cord
On/Off Switch (attached to G)
Adapter
Glass Stones
Quantity
1
1
1
1
1
1
1
1
1
1 set
Package Contents
Figure 3
