HoMedics Duo Lite, Instruction Manual

Page: 2 / 12

QUICK START GUIDE
Please carefully read the full instructions and safety warnings before using Duo Lite.
Make sure the skin in the area you wish to treat is shaved, clean and dry.
Connect the power lead to duo and plug into the mains – the blue/white skin level
indicator lights will flash on and turn off and the green status light will illuminate to
indicate the power is connected.
Press the
q
button to switch on the duo.
Press the q button to select an appropriate level for your skin tone. It is recommended to
carry out a skin test before first use on each area you wish to treat.
Hold the device against the treatment area, making sure the yellow treatment window is
in full contact with the skin. The green status indicator will stop flashing when good skin
contact is made and the duo is ready to flash.
For levels 1 - 3 (AFT FREEGLIDE™), hold the green trigger button down and glide the duo
across your skin. For levels 4 & 5 (IPL single shot) press the green trigger button, hold the
duo against the skin and wait for the flash - then move to the next treatment area.
1
2
3
4
5
6
IB-IPLHH180-0717-01.qxp_Layout 1 24/08/2017 17:04 Page 2