8
9
FOR iPHONE USERS ONLY:
Once properly connected, your iPhone will ask you if you’d like
to turn on Airplane Mode. Select “Yes” (Fig. 6). When your
iPhone is set to Airplane Mode, no cell phone, radio, Wi-Fi,
or Bluetooth signals are emitted from iPhone. As a result,
all incoming calls will be sent directly to voicemail.
NOTE: If iPhone is already in Airplane Mode you will
just need to click “OK”.
Note: When you dock your iPod/iPhone it recharges (until fully charged).
3. To remove/replace an insert, first remove your iPod/iPhone, then place fingernail
in small slot on insert and gently pull up (Fig. 3).
Important: The iPod Shuffle will NOT charge or dock.
Listening to Your iPod/iPhone
1. Press the POWER BUTTON on the Dock n Party Ultra to turn it on (Figure 1).
2. Toggle through the AUDIO BUTTON to play the iPod/iPhone (Figure 1). The IPOD
ICON will appear on the LCD display in the upper left hand corner to indicate that
the iPod mode has been selected (Figure 2).
Note: When the iPod/iPhone is docked and in standby mode, it will
automatically begin playing once the iPod mode is selected on the unit.
3. Press the PLAY/PAUSE button on your iPod/iPhone to pause play; press again to
resume play.
4. Push the DOWN or UP BUTTON on the unit to adjust the system volume.
(Figure 1)
5. Press the
or
on your iPod/iPhone to go to the previous or next track.
6. To turn off the unit, press the POWER BUTTON. The iPod/iPhone will continue
charging in the dock.
Listening to a non-docking iPod or other
portable audio devices
If you are using an iPod without a docking port, other MP3 player, or other portable
audio device, you can play it through the Dock n Party Ultra via the Aux Jack located
on the back of the unit.
1. Plug one end of the Connection Cable (included) into the headphone or line-out jack
on your MP3 device and the other end of the Connection Cable into the Dock n Party
Ultra Aux jack, located on the back of the unit (Figure 4).
2. Press the POWER BUTTON on the unit to turn it on (Figure 1).
3. Toggle through the AUDIO BUTTON on the unit until you reach the auxiliary mode
(Figure 1). The AUX ICON will appear in the upper right hand corner of the LCD
display to indicate that the auxiliary mode has been selected (Figure 2).
4. Turn on and play your MP3 device.
5. Use the DOWN or UP BUTTON on the unit to adjust the system volume
(Figure 1).
Note: You may need to adjust the volume on your MP3 device.
6. To turn off the unit, press the POWER BUTTON.
Note: You also need to turn off your MP3 device.
Listening to the FM Radio
1. Extend FM wire antenna fully for best FM reception. Do not strip, alter or attach to
other antennas. (Figure 4)
2. Press the POWER BUTTON located on the top of the unit to turn it on (Figure 1).
3. Press the RADIO BUTTON on the unit to select RADIO MODE (Figure 1). The
RADIO icon will appear in the upper portion on the LCD display to indicate that
the radio is on (Figure 2).
NOTE: The radio defaults to the last station selected.
Figure 6
