INSTRUCTIONS FOR USE
Step 1
. Remove the Circulation Pro from the packaging. Take out the
remote control and remove the screw from the backdoor using a
screwdriver. Insert 2 AAA batteries into the compartment following the
correct indicators for + and -.
Step 2
. Connect the DC adapter to a suitable power outlet and plug
the small DC socket into the device.
Step 3
. Turn on the power. The central display will light up orange
briefly.
Step 4
. Remove footwear, socks or stockings. Place your bare feet
onto the foot pads.
NOTE
: Both feet need to be on the device to activate the electrical
pulses.
CB200-CA
This device does NOT vibrate
– It uses electrical impulses.
