7
On/Off
Before connecting power
source, be sure the controls are
in the far left position. Select L
or H to activate the massage
and select a zone to begin the
massage function. To choose
the intensity of your massage,
adjust the strength from L to H.
To turn the power off, slide the
switch to the far left position,
the LED light will turn off.
Heat
To activate heat, first turn on
massage function, then press
heat button. To turn off heat,
simply press the button again.
The glowing L.E.D. light
indicates that heat is on.
NOTE:
When selecting
the heat feature with
massaging action, there
will be a slight decrease
in the strength of the
massage output. This
adjustment is perfectly
normal and should not be
interpreted as a defect.
6
Soothing
Heat
8 Massage
Motors
On/Off Targeted
Massage Zones
Activate massage motors
to target specific areas in
the body. Customize your
massage program by
choosing any combination
of zones or all four at
once. To select a zone,
slide the upper, middle,
lower or legs switch to
either low (L) or high (H).
The corresponding L.E.D.
will illuminate. To deselect
a zone, simply slide the
switch to the far left and
the L.E.D. will no longer
illuminate.
Power Adaptors
This massager is powered
by a custom 120 volt AC
home adaptor, and 12 volt
DC auto adaptor. Both are
included with your unit.
CON
Back Revitalizer™
8 Motor Back Massager
