STEP 1
STEP 2
STEP 3
STEP 4
MODEL :
ASSEMBLY INSTRUCTIONS
PAGE: /4
2
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 6 times.)
- Insert hardware A2 onto panel (1).
(Repeat 4 times.)
- Insert hardware B onto panel (3), (4) and (5).
(Repeat 12 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
PRESS
A1
x6
A2
x4
ROTATE
x12
PRESS
B
1
3
4
- Attach panel (3), (4) and (5) to panel (1).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 6 times.)
OR
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
HARDWARE
F
ROTATE
Section View
x6
A2
A1
x6
PRESS
A3
3
5
1
Connect panel (2) to panel (3), (4) and (5) by using hardware C and F.
(Repeat 6 times.)
* In this step hardware B are pre-inserted.
5
3
1
2
ROTATE
x6
C
F
- Fix hardware K into panel (2) with hardware E.
( Repeat 4 times for each hardware.)
- Cover back the hardware K.
( Repeat 4 Times )
SCREWDRIVER
REQUIRED
x16
E
K
K
K
x4
ROTATE
PRESS
5
3
1
2
5
4
4
4
GHSC-1408
