G
GG
F
HH
FF
F
B
8
Attaching the light kit to
the switch housing
9
□
Remove the three light kit mounting screws (FF) from
the light kit (F) and keep these screws.
□
While holding the light kit (F) under your fan motor
assembly (B), locate two single white and blue wires
in the switch housing labeled "FOR LIGHT". Make the
polarized plug connections:
- White to white
- Blue to black
□
Carefully push all wires back into the switch housing.
Install the light kit (F) onto the switch housing with
the three light kit mounting screws (FF) provided. Be
sure to tighten all screws.
Installing the light bulb
and glass shade
CAUTION:
Before starting installation, disconnect the
power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.
□
Install 1 x 9W Medium base LED bulb (HH) (included).
□
Mount the glass shade (G) to the light kit (F) by
unscrewing partially the thumbscrews (GG) on the
light kit (F). Then insert the glass (G) and gently
tighten the thumbscrews (GG) by hand evenly to the
glass (G). Do not overtighten.
Assembly — Installing the Light Kit
NOTE:
If you do not wish to install the light kit, skip steps 8
through 9 and proceed to step 10.
13
HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
