Page 3
ASSEMBLING THE BABY BATH AND CHANGING UNIT:
• Unpack the unit and unwrap each part
• Check to ensure that all components in the box are on the parts list.
• Do not lose the plastic bag that contains the small parts
Picture 1:
To connect the top and bottom steel tubes, insert the bottom tube into the top tube.
Picture 2:
Connect the mattress with the bath stand by securing the mattress to the steel bar with
the adapting pieces and screws on the list of parts. (Screwdriver not included)
Picture 3:
Attach the utility holders by hooking them over the front at the top of the frame. The bath
can be placed on the top of the changing unit.
