6
Reheat function
The reheat function will heat up toast that has cooled or gone cold. Press the loading
handle down then press the reheat button
. Watch the toast to ensure that it doesn’t
burn. Don’t use the reheat function on buttered toast.
Using your toaster
1.
Set the level of toasting using the browning control
. The higher the number
selected, the darker the toast will be.
2.
Place the bread into the toasting slots. Press the loading handle
down until
it latches. The bread will be lowered into the toaster and toasting will begin.
The loading handle will not latch if your toaster is not connected to the
mains supply.
3.
When toasting has finished, the loading handle will rise and the toasted bread
can be removed. You can lift the loading handle upwards beyond its rest
position to help you remove the toast.
4.
If the toast is not done enough it can be toasted again. Turn the browning
control to a lower setting and watch the toast to ensure that it doesn’t burn.
5.
Toasting can be stopped at any time by pressing the cancel button
.
If you are toasting a single slice of bread, set the browning control to a lower
setting than normal. By using a lower setting when toasting a single slice of
bread, it will not be over toasted.
If your toaster jams
Never use a knife or any other utensil or implement to remove jammed bread. Never insert
your fingers into the bread slots.
1.
Unplug the toaster from the mains supply socket.
2.
Allow the toaster to completely cool down.
3.
Carefully ease the bread out of the toaster being careful not to damage the
heating element.
Cleaning
Always switch off, unplug and allow the toaster to cool down before moving, cleaning or
storing. Never immerse the toaster or power cord and plug in water or any other liquid.
•
Clean the outside of your toaster with a damp cloth then dry thoroughly.
•
Never use harsh, abrasive or caustic cleaners.
