4
Operating instructions
It is recommended that you boil the kettle several times following the below instruction
and discard the water before first use. This will remove any material or dust remains in the
appliance, which arise during the manufacturing process.
1.
Open the lid by pulling up the knob, and fill the kettle with water.
Then close the lid (the automatic power cut-off function will not work
with the lid open).
Caution
: The water level must be between the “Max” and “Min” level as indicated
inside the kettle. Too little water will do damage to the heat element and too
much water could boil over!
2.
Place the kettle on the power base before connecting the power supply. Place
the kettle in a way that the spout of the kettle is facing away from you.
3.
Press the switch to “I” position and the power indicator light will switch on. The
water will begin to heat up. DO NOT open the lid or pour while the water
is boiling.
Caution:
Ensure that the power switch is clear of obstructions and the lid is
firmly closed. The kettle will not turn off if the switch is constrained or if the lid is
left open.
4.
Power will be cut off automatically and the power switch will return to the “0”
position once water has boiled. The power indicator light will turn off.
5.
Lift the kettle from the power base and then pour the water.
Note: Handle carefully when pouring the water from your kettle, as boiling
water can scald.
6.
The boiling process can be terminated at any time by lifting the kettle off the
power base or pressing the power switch to the “0” position.
Caution
: Never operate the kettle empty. In the event of this happening, the
thermal cut-off inside the kettle would operate and cut off power automatically.
Unplug the appliance and let it completely cool down for half an hour before
filling it and trying to boil water again.
Note: Ensure the power is turned off while the kettle is not in use.
Cleaning & Maintenance
1.
Remove the plug from wall outlet and let the appliance completely cool down
before cleaning.
2.
Do not immerse power cord, kettle or power base in water.
3.
In order to maintain the polish of the outer surface, do not use abrasive cleaner
to wipe the stainless steel housing. Use a damp cloth to wipe the kettle.
4.
When cleaning the kettle remember to turn off the power switch before
removing the base and wipe away water on the kettle encloser and base before
using again.
