Model
Rated Power
Input
HM-TF001
60W
120V~ 60Hz
1. Remove the battery holder by pressing the locking tab A with your
thumb and pulling it out as per arrow B.
2. Replace the battery with the same type (CR2032 Type Lithium
Battery), making sure the (+) side facing up.
3. Gently push in the holder until securely locked into place.
CAUTION:
Danger of explosion if
battery is incorrectly
replaced. Replace only
with the same or
equivalent type.
·
Be sure to disconnect the appliance from the mains by switching it
off and removing the plug from the power outlet before cleaning.
·
Use only a soft cloth to gently wipe the outer surfaces of the fan clean.
·
To clean between the grills, we recommend using a pipe cleaner,
flexible dust wand, vacuum cleaner or compressed air to gently
remove the dust.
·
DO NOT immerse the fan in water and never allow water to drip
into the motor housing.
·
DO NOT use gasoline, paint thinner or other chemicals to clean the fan.
·
For storage, you may leave the fan assembled and covered to
protect it from dust. Store the fan in a cool, dry place.
Back of remote control
Holder
＋
－
A
B
Specifications
Cleaning and Maintenance
Battery Replacement
WARNING:
Chemical Burn Hazard. Keep batteries away from children.
This product contains a lithium button/coin cell battery. If a new or
used lithium button/coin cell battery is swallowed or enters the body,
it can cause severe internal burns and can lead to death in as little as 2
hours. Always completely secure the battery compartment. If the
battery compartment does not close securely, stop using the product,
remove the batteries, and keep it away from children. If you think
batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.
The cells shall be disposed of properly, including keeping them away
from children. Even used cells may cause injury.
17
18
Summary of Contents for HM-TF001
Page 1: ...160mm 110mm 128g 80g 5mm...
