NOTE:
When fastening with nuts and bolts, always use a washer (E) between the tube and the bolt or
the tube and the nut.
Step 1
Fasten the front and rear upright supports (2 and 3) at the top by using bolts (A), washers (E)
and metal
nuts (G). Repeat the same procedure for both sides. Keep the bolts loose. At both ends, insert the
assembled upright supports (2 and 3) into the top cross beam (1).
Step
2
Fasten the lateral cross braces (4) to the upright supports (2 and 3) by using bolts (B), washers (E)
and
metal nuts (G).
Repeat
the same procedure for both sides. Fasten the rear cross brace (5) to the rear
upright supports (3) by using bolts (B), washers (E)
and metal nuts (G).
Insert the leg caps (K) into all of
the base feet. Tighten all of the nuts and bolts.
2
3
A
E
G
A
E
G
E
E
2
3
1
2
4
5
3
K
K
B
E
E
G
