Assembly
6
Pull apart the legs of the stand so that
they are snapped into an x-shape. Place
the tree stand on a level surface.
Assemble the tree from the bottom to the top. Remove protective cap and insert the
pole of 'section 1' into the assembled stand. Insert the pole of 'section 2' into 'section 1'.
Insert the pole of the 'tree top' into 'section 2'. Ensure that all poles are firmly secure.
Connect the lights (see illustration Fig. A) and plug the adapter (5) into the wall outlet.
Be sure that all wires are free of branch hinges.
Click
*Electrical rating for the tree
(indoor use only)
Input: AC 100-240V, 50/60Hz, 0.35A
Output: DC 29V 0.4A
Controller: 0.4A
Press the Selector Button to select from the 7 preset light effects in the following sequence:
1. Steady glow 2. Slow fade 3. Fast fade 4. 3-speed fade
5. Slow blink 6. Fast blink 7. 3-speed blink
Operating instructions
There are 5 brightness levels. Simply press the controller buttons to
increase or decrease the brightness to your liking.
Default Timer Function:
Lights stay ON for 8 hours and then turn OFF for 16 hours. Timer function will restart
when any control button is pressed or main power supply to the lights is reconnected.
Memory Function:
If you unplug and reconnect the product to the power outlet, the product will resume
the last light effect and brightness level that was selected before the power was
switched off.
Light Controller
Selector
Button
Step 1
Step 2
Fig. A
Lock the cap.
Find the male and female connections.
Insert the male connection into the
female connection.
3