Assembly Instructions
Step 4
Fitting the cornice
a:
Place the cornice
3
on top of the wardrobe.
ensure the the back of
the cornice lines up with
the back of the pilaster
and that each end lines
up with the edge of the
pilaster.
When in position fi x in
place using the 20mm
cornice screw
D
the
pre drilled hole in the
cornice
3
and a philips
screwdriver.
Note:
There are not any
pre-drilled holes in the
top of the robe for this.
Continued on next page.
6
Bar handle
22mm Handle screw
Step 3
- continued
b:
Replace the bar
handle on the front of
the unit. Fix in position
by screwing the 22mm
handle screw into each
bar handle from inside
the unit using a Philips
screwdriver.
Note:
Only use the
20mm handle screw that
the handles were pre-
fi tted with.
b:
a:
1
2
Philips screwdriver
1
2
D
Philips screwdriver
Pilaster
3
