20
Digital Satellite Receiver SMP-6200
Manual Search
Installation
Main Menu
●
Satellite
AMC-4
●
Frequency
●
Symbol Rate
●
Polarization
V
●
Scan Mode
All
●
Network Search
Off
●
PID Search
Off
60%
Strength
76%
Quality
●
Start Scan
●
Edit TP
Move OK
OK
●
Antenna Setup
Select Exit
EXIT
Scan Mode
There are two scan modes in this entry, select by pressing
e
/
f
key. If scan mode is set to ‘All’, all
the channels in the transponder that are selected will be downloaded when the signal is locked. If scan
mode is set to ‘FTA’, only free-to-air channels will be downloaded.
Network Search
Press
e
/
f
key to select either ON or OFF. When ‘ON’ is selected, pressing the Red key will bring
the menu to TP search menu and all the channels in the network table will be downloaded.
PID Search
In PID search mode (ON), user is provided with the searching of a specified services by inputting it’s
a/V/PCR PID’s. When ‘ON’ is set and ‘OK’ is pressed, user will be able to search by PID menu.
User can set the PID information in services searching. The PID is in decimal value. Press the keys
0…9 to enter the value.
The meanings of these items are explained in Manual Searching menu except for:
PCR PID
This is used to set PCR PID of certain service.
V PID
This is used to set Video PID of certain service.
A PID
This is used to set Audio PID of certain service.
