Home SM-7501W, Instruction Manual, Page: 5 / 32

5
ENGLISH
HOW TO USE THE APPLIANCE
FOOD pREpARATION
CLEANING
INSTALLATION OF METAL pLATES
1. Make sure that the appliance is unplugged. Place the heating plates in the appliance.
2. Turn on the power supply. Both control lamps will turn on (red and green). The green lamp
indicates that the appliance is plugged in, and the red one that the appliance is heated up
and ready for food preparation. The appliance has an automatic thermostat and until the
red light is on, the appliance is heating. When the red light goes off, the appliance reaches
the temperature needed for food preparation. During use, the red light will indicate when
the appliance warms up (the red light is on), and when the temperature is maintained (the
red light is off).
3. About 5 minutes is needed for the appliance to warm and the red light goes off.
4. Now you can use the appliance. If you want you can put little oil on the plates before use.
5. When you finish food preparation, unplug the appliance and let it cool before cleaning the
plates and disposal.
1. Make sure that the appliance is turned off and whether it is cooled down.
2. Press the release button. Wash the plates with warm water and detergent / dishwashing
liquid or in the dishwasher and dry them.
3. If the fat slips under the heating plates make sure that the appliance is turned off and clean
the greasy place with a damp cloth, then dry it. Never use abrasive cleaners or cleaning
supplies for plates or any other part of the appliance. Wipe the appliance with a soft damp
cloth and dry it.
1. Make sure the appliance is unplugged before inserting or removing the plates.
2. To remove plates that are currently on your device, just press the button that holds the
plate and then remove the plate from the appliance.
3. To set up the plates, place them in a space designed for them. There is no top and bottom
plate, they are both the same.
4. Push down the plate handles until the plate clicks into place.
5. Before the first use, oil the heating plates, turn the appliance on and leave it to run for a few
minutes. Turn off the appliance, allow it to cool down and then pick up the excess oil with a
dry paper towel / napkin.
DANGER
from burns of hands and fingers! Always allow the appliance to cool
down before removing the plates.