9
Cooler isn’t cool
Cooler is not refrigerating
LED light is off
Condensation on the
glass door
The door is being opened too often.
The cooler is too full of bottles or cans.
The power is out or the cooler isn’t
plugged in.
The LED light is broken.
The temperature is set too low or too high.
Reduce the frequency of opening the door
and give it 4-5 hours.
Check the power. Make sure that the cooler
is plugged in.
Contact customer support.
Increase the temperature and use a rag to
wipe away any drops of water.
DISCONNECTING THE BEVERAGE COOLER
CLEANING YOUR BEVERAGE COOLER
FREQUENTLY ASKED QUESTIONS
MAINTENANCE
TROUBLESHOOTING
I’m hearing some sounds, what’s up with that? Buzzing or any gurgling sound is normal, as that can be a result of the unit
working properly or refrigerating fluid flowing through the pipeline.
POSSIBLE CAUSES
POSSIBLE CAUSES
PROBLEM
Note:
Do not use hard brushes, wire brushes, abrasives, organic solvents, boiling water, acid, or alkaline items
as this may damage the cooler surface and interior.
Unplug the power plug from the socket to disconnect the cooler.
Dusting behind the cooler and on the ground will improve the cooling effect and save energy. The interior of the cooler
should be cleaned to avoid any odor. Follow the cleaning procedure below:
1. Unplug the cooler.
2. Wipe the door seal with warm water.
3. Use soap and warm water to clean the cooler.
4. Reconnect the cooler when the cooler is clean and dry.