17
Position your dishwasher in your desired location with its back resting against a wall and the sides adjacent
to cabinets or walls. The dishwasher is equipped with water supply and drain hoses that can be positioned
to the right or the left of it to facilitate proper installation.
Electrical Requirements
Please look at the rating label to understand the rating voltage and connect the dishwasher to the
appropriate power supply. Use the required fuse 10 amp, time delay fuse, or circuit breaker recommended
and provide a separate circuit for this dishwasher.
Electrical Connection
Ensure the voltage and frequency of the power outlet corresponds to those on the rating plate. Only insert
the plug into an electrical socket that has been grounded properly. If the socket is not appropriate for the
dishwasher, replace the socket. Do not use adapters, as they may cause overheating or burns.
This dishwasher must be grounded. In the event of a malfunction or breakdown, grounding will
reduce the risk of electrical shock by providing a path of least resistance for the electrical current.
Your dishwasher is equipped with a cord with a grounding conductor and plug. The plug must be
used in an outlet that is grounded in accordance with all local standards and requirements.
POSITIONING THE DISHWASHER
THE POWER CONNECTION
GROUNDING INSTRUCTIONS
INSTALLATION
WARNING! For personal safety:
DO NOT USE AN EXTENSION CORD OR AN ADAPTER PLUG WITH THIS DISHWASHER.
DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE GROUNDING CONNECTION FROM THE POWER CORD.
WARNING!
Improper connection of the grounding conductor can result in the risk of an electrical shock.
Check with a qualified electrician or service representative if you are unsure whether the dishwasher is
properly grounded.
Do not modify your dishwasher’s plug. If it does not fit properly in your outlet, have a qualified electrician
install a different outlet.
WARNING! ELECTRICAL SHOCK HAZARD
Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
ATTENTION! The installation of the pipes and electrical equipments
should be done by professionals.
INSURE PROPER GROUND EXISTS BEFORE USE