INSTALLATION
1.
Before installation, carefully remove packaging, and make sure not to damage the unit or the
connecting cable. The unit must not be operated if it is damaged in any way!
2.
Take out the unit from the box!
3.
Fasten the enclosed bases to the bottom of the heater (Figure 3.). Use the 4 small screws for
each base for that purpose.
4.
Stand the unit on its feet on a hard, flat surface!
5
.
To ensure proper operation, free circulation of hot air must be ensured. Therefore, please,
observe the minimum installation distances indicated in Figure 2.!
6
.
The switches on the unit must be in OFF position!
7
.
Connect the unit into a standard grounded wall power socket!
Now the unit is ready for
operation!
Do not cover!
Covering the unit can cause overheating, fire or electric shock!
Caution: Risk of electric shock!
Do not attempt to disassemble or modify the unit or its
accessories. In case any part is damaged, immediately power off the unit and seek the
assistance of a specialist
.
In the event that the power cable should become damaged, it should only be replaced by
the manufacturer, its service facility or similarly qualified personnel.
FEATURES
Electric heater for warming the atmosphere of indoor premises.
•
With smart phone application, you can control your device from anywhere, which is
located at WiFi environment.
•
with touch buttons
•
adjustable output 1000 W / 2000 W
•
electronic thermostat
•
24-hour shut down timer
•
child safety
lock
•
IPX4: protected from splashing water
•
metal front panel
•
standalone design
•
automatic switch-off when overheating
STRUCTURE (Figure 1.)
1.
main switch
•
2.
base •
3.
screws for fixing the base
•
4.
power cable
•
5.
metal front panel
•
6.
temperature display
•
7.
on/off switch touch button
•
8.
temperature setting
•
9.
heating stage selection
•
10.
shut down timer
OPERATION
The unit can be controlled with its touch buttons or with free smart phone application.
With touch buttons: After you have connected the device to the power network, turn it on with the main switch. It will emit a short beep. You can
switch
on or off
the device with button. With the button of the device you can set the desired temperature
from 15 to 35 °C
, while the temperature is
flashing.
Heating stages
can be selected with
ʃʃ
buttons. The low stage (1000 W) will be indicated with yellow
ʃʃ
icon, while the high stage (2000 W) is
indicated by red
ʃʃʃ
icon on the display. With button, you can set remaining operation time, up to 24 hours. Displayed value will be flashing during
setting, and letter (h) will indicate the hour setting.
If you press
button when the appliance is in standby position, you can schedule switch on.
Child
lock
function can be switched on or off with button of the device by holding it for 3 seconds. In case of
power cut
or after switching off with the main
switch, all settings, including child protection lock will be deleted. After switching on, the default thermostat temperature is 30 °C. By switching off with
button, the setting of the thermostat and heating stage remains, and the shutdown timer counts back as well.
With smart phone application (The phone has to be connected to the internet.):
1. Read the QR code with your phone
(Figure 6.)
, then download and install the „Tuya Smart” application.
2. Select the country dialling code, then enter your mobile phone ID, and press „Get” button.
3. Enter the verification code, received in SMS, and create your user password to be used in this application,
which should consist of numbers and letters. You can take 60 seconds for that.
4. Enter the application: „Login”
5. Ensure that the device and the smart phone are as close to the WiFi router as they can.
grounded 230
V ~ / 50 Hz electric wall outlets!
2
4
.
Unwind the power cable completely!
2
5
.
Do not
lead the power cable on the device, or near the air inlet and outlet openings!
2
6
.
Do not lead the
power cable under carpets, doormats, etc.!
27
.
Do not use extension cords or power strips to
connect the unit!
28
.
The appliance should be located so as to allow easy access and removal of
the power plug!
29
.
Lead the power cable so as to prevent it from being pulled out accidentally or
tripped over.
3
0
.
The unit is intended for household use. No industrial use is permitted!