Model No. ES06462V
104W Dual Head AC LED Work Light
(888) 782-5618
INSTALLATION AND OPERATION
To install:
Loosen locking knob and pull legs away from the center pole until all legs are fully
extended. Retighten locking knob firmly.
Note:
it is possible to utilize tripod without legs fully extended, as long as all 3
outer legs touch the ground, however full extention is highly recommended for
maximum security and sturdiness
Attach Handle to Bracket using (2) plastic mounting knobs (Pre-installed on the
Bracket)
Figure2:
Attach light head fixtures to Bracket using (2) mounting knobs (Pre-installed on the
Bracket)
Figure4:
Attach the power cord to Handle with the screw pre-installed on the handle
Figure5:
Unlock locking collars by twisting counter clockwise. Lift the pole up to desired
height. Twist clockwise to relock locking collar.
Figure6:
Attach Bracket to tripod by pinching red buttons in. Align holes on the underside
of the light bar with locking tabs on tripod stand. Release red tabs to lock
Note:
Make sure the bracket is connected completely to the locking tabs on the
tripod stand. Lift the handle to confirm. Failure to complete this step may cause
injury or damage to the lights
Figure3:
s e c u r i t y
www.homezonesecurity.com