(888) 782-5618
Figure 1
- Slide the switch to "AUTO" position
Figure 2
1.
Choose desired wall location. Drill one hole on the wall. Insert the plastic anchor and screw the screw into the wall, leaving 2mm
long thread.
2.
Hang the light on the screws with the mounting hole
Note: Lights with crystalline panels may have a protective film over the solar panel. This must be removed prior to use.
1.
Use a damp cloth to clean the solar panel
2.
To avoid any damage to this light, please do not use any chemical or abrasive cleaner
HOW TO OPERATE AND INSTALL
HOW IT WORKS
CLEANING AND MAINTENANCE
Solar Powered Motion Sensor
Wall Light (2-Pack)
Model No. ELJ9542V
Figure 1
Figure 2
This product contains (1) 3.7V 14500 400mAH Li-ion rechargeable battery. When
the battery expires, it must be recycled or disposed of properly. Please contact
your local waste disposal authority for correct procedure. Do not put battery into
fire.
1.
Use a screwdriver to remove the 4 screws on the back of the unit.
2.
Open the battery chamber cover.
3.
Replace the old battery with new battery making sure the polarity is correct.
4.
Place back the battery chamber cover by tightening the 4 screws.
Battery replacement
RECHARGEABLE BATTERY
Solar panel collects
sunlight to charge
the battery (included)
during the day
Automatically turns
on at dusk for up to
8 hours of nighttime
illumination
1
2
Solar panel collects
sunlight to charge
the battery (included)
during the day
Automatically turns
on at dusk for up to
8 hours of nighttime
illumination
3
4
a
