(888) 782-5618
Figure 1
- Slide the switch to "AUTO" position
Figure 2
1.
Choose desired wall location. Drill two holes on the wall (use the two mounting holes as template for the screw locations as shown
in Figure 1). Insert the plastic anchors and screw the two screws into the wall, leaving 2mm long thread.
2.
Hang the light on the screws
Note: Lights with crystalline panels may have a protective film over the solar panel. This must be removed prior to use."
1.
Use a damp cloth to clean the solar panel
2.
To avoid any damage to this light, please do not use any chemical or abrasive cleaner
This product contains (1)1.2V AA 400mAH Ni-MH rechargeable battery. When the
battery expires, it must be recycled or disposed of properly. Please contact your
local waste disposal authority for correct procedure. Do not put battery into fire.
1.
Use a screwdriver to remove the 4 screws on the back of the unit.
2.
Open the battery chamber cover.
3.
Replace the old battery with new battery making sure the polarity is correct.
4.
Place back the battery chamber cover by tightening the 4 screws.
HOW TO OPERATE AND INSTALL
HOW IT WORKS
CLEANING AND MAINTENANCE
Battery replacement
RECHARGEABLE BATTERY
Solar panel collects sunlight to charge
the battery (included) during the day
Automatically turns on at dusk for up to
8 hours of nighttime illumination
Solar Wall Light (4-Pack)
Model No. ELJ9533V
Figure 1
Figure 2
WALL
