2
2
Register the Phone Jack with the Controller
You can register a new Phone Jack from either a Handset or a network
PC. The following procedure describes the registration process using a
Handset. For information on registering a Phone Jack from a network
PC, see the Network Reference Manual that came with the Controller.
1.
From a Handset that is already registered with the Controller, press
and release MENU until you reach the screen containing the Setup
option.
2.
Press 9 (Setup).
3.
Enter your Controller password, then press END. (For password
information, see the Network Reference Manual that accompanied
the Controller.)
4.
Press 2 (Network).
5.
Press 2 (Phone Jacks).
6.
Press 1 (Add).
7.
Enter the last eight digits of the Phone Jack serial number. Press
END when finished.
Note: The serial number is located on the label on the jack.
8.
The new jack will be added with a default name of “ExtXX,” where
“XX” is the next available extension number. Press END to accept
the default name or use the keypad to overwrite the default name
with a new name. Press END when finished entering the new
name.
Note: Device names can be up to 12 characters in length.
Example
To enter the name “Tom:”
1. Press 8 one time to add “T”;
2. Press 6 three times to add “o”;
3. Press # to advance to the next space;
4. Press 6 one time to add “m”;
