Using Your Candy Floss Maker
Set up the unit in accordance to the initial set up guide. If parts have been cleaned ensure
all parts are dry. Make sure the unit is secure on clean level surface away from water.
1. Plug in the unit at the OFF position
2. Turn the unit to ON position and allow it to
run for at least 5 minutes. This will allow it to
warm up. Then switch to OFF.
3. Measure a level tablespoon of sugar with the
measuring spoon supplied . Pour sugar into silver
centre of the extractor head when it is stationary.
Switch to ON position. The candy floss maker will
spin delicious cotton candy strands in circles
around the bowl
Pre-Heat The Unit
Pour The Sugar
1 Scoop of
sugar here
4. When you can see the cotton candy web in the bowl, collect the cotton candy on the
straw.
4a. Hold the straw vertically in the bowl, spin the straw with your fingers while you circle
the bowl this will gather first strands on the straw.
4b. Once some cotton candy has collected on the straw then hold the straw in a
horizontal position over the extractor head. Continue spinning the straw with your fingers
in the horizontal position and moving from side to side to gather the strands.
Collect The Candy Floss
4a. Vertical collection to get
the first strands
4b. Horizontal collection to
gather cotton candy
