Assembly Instructions 2/5
IMPORTANT
Do not tighten up all the screws until each part is properly assembled.
You should keep Hex Wrench in a safe place as you may need to tighten the Head Cap Bolts in the future.
STEP 2
Cam Lock Screw
Attach Middle Panel (C) to
Rail (L), to Front Stretcher (J)
and Back Stretcher (I) with
Head Cap Bolts (long) and
tighten.
Slide Back Panel (N) to Back
Stretcher (I).
Attach Bottom (B) to unit with
Head Cap Bolts (long) and
tighten.
E
J
A
STEP 1
Put Cam Lock Screws into the
pre-drilled holes of Top (A), Side Panel
(E), (F) and tighten.
F
C
L
I
N
B
Head Cap Bolt (long)
Head Cap Bolt (long)
