EN
11
6. Clean the device with warm water, and store in open air
whilst it is wet.
7. Maintenance
7.1 Routine maintenance
U
After use, wash the brush head under running water to
remove any toothpaste or debris.
[
Do not wash with soap or chemicals.
U
If debris or toothpaste accumulates on the handle
(#2)
,
wash under running water and dry with a clean dry cloth.
[
Do not try to remove any stuck debris from the brush head
(barrier and/or electrodes). In such cases, replace the brush
head
(#1)
. Refer to section 7.4 Replacing the brush head.
7.2 Maintenance of the RF contact
U
Once a month, remove the brush head
(#1)
from the handle
(#2)
. Clean the
groove in the handle
(#2)
to remove
any toothpaste or debris that may have
accumulated. Use a cotton bud, rinse and
dry with a clean dry cloth.
U
Remove debris and excess toothpaste
from the brush head
(#1)
and handle
(#2)
. Clean the
underside of the brush head
(#1)
using a cotton bud.
U
If another person is going to use their brush head
(#1)
, be
sure to rinse and wipe down the handle
(#2)
, including the
connection between the brush head
(#1)
and the handle
(#2)
before another person uses the device.
