9
www.homewerksww.com
ASSEMBLY INSTRUCTIONS
Wall switch
back view
White
wire
Black
wire
Red
wire
Green
wire
Wall
switch
NIGHT LIGHT
8
9
7. Secure the suspension bracket I (C) to fan housing using
screw (CC) (included). Secure suspension brackets (D & E)
with screws (BB) (included).
8. Remove junction box cover. As shown in wiring diagram on page
5, using quick connect ports connect house wires to switch and
fan.
Note: Do not use metal wall plate with the switch, as it may
cause interference with the fan operation.
ATTENTION:
The switch included with this ventilation fan
requires a neutral wire connection. If a neutral line is not present,
one will have to be ran by a qualified professional.
Please see the Wiring Diagram on page 5 of your instruction
manual. If you require assistance, please call 1-877-319-3757
before attempting this switch installation.
NOTE:
This switch is intended to only operate independently
with this bath fan, connections to other electrical fixtures should
be avoided.
9. Connect a 4 in. circular duct and vent to the outside. Secure it
with duct tape or clamp (not supplied).
Turn on power source. Test the fan.
7
1. Join the connectors for the BLUETOOTH
®
speaker (black
wires), light (white wires), and RF receiver (gray wires).
BLUETOOTH
®
SPEAKER FAN GRILLE INSTALLATION
Housing must be installed flush with ceiling board or the grille mounting spring will not be long
enough to insert into the slots inside the fan housing.
1
