Assembly
Stage C.
6). Lay the Upper Cross Beam (09) onto the Main Frame (03) and connect them using 2 x M10 x 65mm Hex Bolts (56), 4 x
M10 Washers (63) and 2 x M10 Nylon Nuts (66).
7). Connect the Weight Guide Tube(06) to the Upper Cross Beam (09) using 2 x M10 x 20mm Hex Bolt (54), 2 x M10 Washers
(63).
8). Screw the Rubber Bumper (44) to the Main Frame (03) as shown.
9).Connect the Press Pin (28) to the Main Frame (03) using M8 x 40mm Hex Bolts (61), 2 x M8 Washers (64) and M8 Nylon
Nuts (67).
10). Connect the Volitant U (19) to the Main Base (03) using 2 x M10 x 65mm Hex Bolt (56), 4 x M10 Washers (63) and
2 x M10 Nylon Nuts (66).
39
63
56
28
44
64
61
54
63
39
67 66
63
09
56
19
19
03
06
63
39
66
7
