E
N
G
L
IS
H
SAFETY HINTS
•
The appliance may only be operated on an electricity
supply which corresponds to the voltage and type of
current specified on the housing (rating plate).
•
WARNING! Do not use this appliance near water in bath
tubs, basins or other vessels.
•
When the hairdryer is used in a bathroom, unplug it after
use since the proximity of water presents a hazard even
when the hairdryer is switched off.
•
For additional protection, the installation of a residual
current device (RCD) with rated residual operating current
not exceeding 30 mA is advisable in the electrical circuit
supplying the bathroom. Please consult your local
electrician.
•
If, however, the appliance should fall into water, pull the
power plug out of the power socket immediately!
-Never place your hand in the water!
-Have your appliance checked by a qualified electrician
before using it again.
•
Do not direct aerosols or water sprays into your appliance!
•
Ensure that your appliance does not get wet (water
splashing, etc.) and do not use it with wet hands. If you put
your appliance down whilst drying your hair, always switch
it off as a precaution.
•
The air outlet grille will inevitably become hot during use.
•
Do not allow the power cord to come into contact with the
air outlet during use.
•
When drying your hair in rollers, do not allow anyclips,
hairpins, etc. to project more than 10 mm (finger width) so
as to ensure that they can not come into contact with the
live parts inside the appliance.
•
The air inlet and outlet openings should never be
obstructed.
•
If, however, the airflow is inadvertedly obstructed during
use, the built-in thermal safety cutout will automatically
switch off the appliance.
•
The HAIRDRYER will switch on again automatically after
cooling down for a few minutes.
•
Always unplug your appliance after use and before
cleaning it!
•
The safety grill fitted in the air inlet opening prevents hair
from being drawn in.
•
If the grill becomes clogged, it should be cleaned (e.g. with
vacuum cleaner or brush), as otherwise the airflow will be
obstructed to such an extent that the thermal cutout will
operate.
•
Keep your hair away from the immediate vicinity of the air
inlet opening.
•
Please check the power supply cord for damage form time
to time! If the power supply cord is damaged, it must be
replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
•
Repairs to electrical appliance should only be performed
be a qualified electrician. Improper repairs may place the
user at serious risk
Jet nozzle
Air inlet
Handgrip
Eye
Switch ON/OFF
COOL SHOT
Temperature Setting
