Home electric HS3002, User Manual

Page: 20 / 24

Cleaning and maintenance
•
Do not immerse the equipment in water.
•
After each use, pull out the attachment comb and remove any remaining hair from the
blade set and the housing opening with the cleaning brush (Fig. 6).
•
Only wipe the equipment with a soft cloth which may be slightly damp. Do not use
solvents or scouring agents.
•
It is important to add a drop of oil if you do not use the clipper for a month (Fig.7)
•
If, despite regular cleaning, the cutting performance drops, the blade set should be
changed.
•
After use and cleaning of the equipment, the attachment comb also acts as a blade
guard.
Changing the blade set
•
Switch the equipment off with the On/Off switch (Fig. 2b)
•
The blade set can be removed by pressing down and away in the direction of the arrow
on the housing (Fig. 6a)
•
To reuse, place the blade set with the hook engaged into the slot in the housing and
press down into the housing until it snaps into place (Fig. 6b).
Disposal of battery
•
Please dispose the equipment at the end of its useful life in an environmentally
friendly manner.
•
Pull the plug-in transformer out of the wall socket and turn the equipment on so that the
battery is fully discharged.
•
Remove blade set and remove the screw from the bottom housing (Fig.12). Pull apart
the two halves of the housing (Fig. 13).
•
Remove the circuit board.
•
Cut the connection plate between battery and circuit board and then remove the battery.
(Fig. 14).
•
Take the battery to a suitable collection site.
•
Do not connect to the mains again with the battery removed.
20
ENGLISH