ITEM # ACNS18V BRAD NAILER/STAPLER
5
(image a) (image b)
LED Lighting
2 pcs Led lighting in each side can be turned on when the machine is working
Check the contact trip mechanism
Remove all staples or nails from the magazine.
Press the safety nose/contact pin and pull the trigger. The safety nose/contact pin and the trigger
should move freely.
Reload the staples or nails to the magazine.
Do not use the tool if the safety nose/contact pin cannot move freely.
Place the contact pin on the workpiece and press the machine without pulling the trigger, the
machine should not fire; Take the machine from the workpiece, the contact pin should spring back
automatically. Pull the trigger (the machine should not fire).
Inserting Staples or Nails into the magazine
NOTE:
The number of staples or nails left in the magazine can be read using the viewing window.
a) Remove battery pack from the tool.
b) Press the release button and pull out the magazine cover.
c) Tilt the tool
（
approximately 45° Angle
）
and place nails/staples into the track of the magazine
channel.
Make sure that the fasteners are placed correctly:
l
Staples are placed against the profiled side of the rail, the crown of the staple is in the