4
Assembly
1
Attaching the cam bolts
NOTE:
Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make the
assembly easier.
□
Unpack the unit and confirm that you have all the hardware and required parts. Assembly the unit on a carpeted floor or the empty carton to
avoid any scratch.
□
Securely screw four cam bolts (BB) into the designated small holes on the base (C). Fully tighten with a Phillips screwdriver.
2
Assembling the lower side panels
□
Insert two wood dowels (CC) into the inner holes of each lower side panel (K) and attach them to the base (C) by using the cam locks (AA),
as shown.
C
K
K
AA
CC
C
BB
