13
homeDepot.com/homeDecorators
please contact 1-800-986-3460 for further assistance.
Operation
Operation
3
4
adjusting the heater
press the heater button to set the thermostat. the fireplace
contains three infrared quartz heating elements.
the thermostat setting range is 62°f - 82°f or 17°c - 27°c
or always on.
the thermostat is adjustable by 2°f or 1°c increments.
the up and down buttons“ ”on the remote will
increase / decrase temperature setting.
NOTE:
to change between °f and °c press and hold the
heater button on the control panel for 3 seconds.
push the power button to supply power to all
functions of the fireplace and put the insert in a
standby mode.
push the power button again to turn off all functions.
1
2
powering the fireplace
NOTE:
holding the power button on the control panel for
10 seconds will disable the heater function.
NOTE:
all previous settings are held in memory, so the
next time you power up the fireplace, the unit will turn on
with the same settings.
adjusting the flame
there are 6 brightness levels that can be selected:
settings f6 - f4 decrease in amber brightness
settings f3 - f1 decrease in spectrafire brightness
pressing the timer button will cycle through the timer
settings; 30 minutes, 1 hour, 2h, 3h, 4h, 5h, 6h, 7h,
8h, 9h and off.
setting the timer
NOTE:
the control panel can be accessed at the upper-right corner of the insert.
/
