4
Assembly
1
Attaching the support foot
□
Carefully tip the vanity (A) backward to expose the drill
holes on the underside.
Align the screw in the support foot (E) with the hole. Turn
the support foot (E) clockwise until the support foot (E) is
tight against the vanity (A).
□
2
Adhering the basins
□
Apply a layer of silicone on the underside of the top (B) along
each basin cutout, where the basins (C) will be in contact.
Lower each basin (C) onto the top (B), lining it up with the
cutout.
Wipe away any excess silicone.
□
□
B
C
C
A
4
Sealing the basins
3
CAUTION:
Do not over tighten the screws as this
could crack the basin.
□
Position the brackets (BB) so they clamp the basin (C) edge
to the top (B).
Thread the screws (AA) through the spaces in the brackets
(BB), then through the anchor in the top (B).
Tighten the screws with a screwdriver, turning it clockwise.
□
□
B
AA
C
BB
Securing the basins
□
Apply a bead of silicone sealant where the basins (C) meet
the top (B).
Use a clean rag to push in the silicone and wipe away
any excess.
□
E
B
C
