9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Troubleshooting
FACTORY RESET
To perform a factory reset on the motor module, press and hold the button on the electronic endcap for 10 seconds. The button LED will blink
3 times alternating between red and blue. A factory reset will erase all calibration settings or programs/schedules that have been stored on the
motor module.
SBMC01 LED Displays
End Cap LED
Mode
Color
Indication Speed (Blinks Per Minute)
Low Battery
Red
6 bpm
Error Mode
Red
175 bpm
Pairing Mode
Blue
60 bpm
Successful Pairing
Blue
600 bpm
Receive Identity Command
Blue
Solid blue/10 seconds
Calibration Mode
Blue
60 bpm
Calibration Save
Blue
Solid blue/5 seconds
Save Favorite Position
Blue
Blinks 3 times@150 bpm
Factory Reset
Red/Blue
Alternate red and blue blinking 3 times each
Charging (Adaptor only)
Red
25 bpm
