INSERTING CAM-LOCK
CORREC
T
TIGHTENING CAM-LOCK
Use a Flat-head Screwdriver to turn Cam-
lock clockwise so it locks onto the head of
the Cam-bolt. Turn until it is snug (about
3/4ths of
a turn
) --
over-tightening could
damage Cam-lock or/and Cam-bolt.
Align the arrow on the Cam-lock to the
Cam-bolt head and insert the Cam-lock.
Ensure
Cam-lock is fully
inserted
.
CAM-LOCK
X
Shoulder is flushed (on the
same level) with the panel.
Shoulder is above the panel.
CAM-BOLT
INSERTING AND TIGHTENING CAM-BOLT
SHOULDER
Place Cam-bolt on the designated pre-drilled holes on the panel. Use a Phillips Screwdriver
to screw-in Cam-bolt verticall
y
until shoulder is flushed
(
on the same level
)
with panel.
Tools Required
WRONG
Place
Cam-bolt on pre-drilled
hole and screw in vertically
x
Insert Cam-lock
with arrow align
to Cam-bolt head
INSTRUCTIONS FOR CAM-BOLT & CAM-LOCK
Page
4
of
1
1
