11
INSTALLING THE CABINET
□
For wall stud installation, insert #12 x 3 in. screws
with washers into the stud locations (not included).
□
For drywall installation, drill holes at the appropriate
locations and insert toggle bolts with washers
(not included).
□
For concrete wall installation, drill 1/4 in. holes at the
appropriate locations and insert #12 wall anchors,
followed by #12 x 3 in. screws (not included).
14
INSTALLING THE VANITY TOP
IMPORTANT:
Do not use plumber’s putty.
NOTE:
The faucet, drain, and supply lines are not included. Install these
parts to the vanity top according to the manufacturer’s instructions.
□
Apply silicone caulk/sealant (not included) to all four corners of the cabinet.
□
Place the vanity top onto the cabinet.
□
Position the top so that it has an equal amount of overhang on each side
and use a level to ensure the vanity top surface is level.
□
Apply silicone onto the seam between the edge of the vanity top and the
wall, smooth the bead, and allow to cure before use.
□
NOTE:
Matching side and back splashes available, sold separately.
To purchase, visit your local Home Depot store or go to homedepot.com.
13
INSTALLING THE HARDWARE
□
Attach
the knobs (AA) to the cabinet with the provided screws (BB).
AA
BB
Installation
12
D
RILL HARDWARE IN DOOR
□
Using a clamp, place a scrap piece of wood on the face of the door
and tighten to hold in place, taking care not to damage the face of
the door. Use a drill with a 5/16” bit to finish drilling a hole in the
exsiting pilot hole.
HOMEDEPOT.COM
Please contact 1-888-774-8062 for further assistance.
