Please call for replacement parts or assistance:
1-866-942-5362
Whalen Storage
Factory No.: 15548
Page #4 of 4
Assembly Instructions
1.
Align and attach Closed Pole Holder (2) to side panels of cabinet (Sold Separately) using
three M4 x 16 mm Short Screws (4) through holes on holder into the pilot holes, as shown in
figure below. Repeat for Open Pole Holder (1).
Note:
Ensure the flat edge of the Closed Pole Holder (2) is level before tightening the
screws completely.
2.
Insert one end of the 25 mm Metal Pole (A) assembly into the Closed Pole Holder (2),
securing with M4 x 15 mm Self-tapping Screw (3). Repeat for the opposite end.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Never use water to clean your furniture as it may cause damage to the finish.
Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.
Keep product away from direct sunlight as it may damage the finish.
Check bolts/screws periodically and tighten them if necessary.
We hope you enjoy your purchase for many years.
Thank you for your purchase.
WSMSL-SKW
WSMSL-SKN
(Sold Separately)
WSMSL-HSCW
WSMSL-HSCN
(Sold Separately)
2
4
3
2
A
