HOMEDEPOT.COM
/HOMEDEPOT.CA/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
6
Installing support bars
2
□
Using a stud finder or equivalent tool, locate at least
1 wall stud and mark its positions on the wall for
each support bar (A). While holding the support bar
(A) in its position against the wall, check that it is
level, then mark 5 positions for 5 holes as indicated.
One of the hole must be right over the wall stud.
Assembly
H = H1 + 18-13/16’
’ [478]
Support
bar
A
A
Proper height of the
holes to be drilled on
the Support Bar.
Installing support bars
1
□
Measure the height (H1) at where the cabinet will
be located, as illustrated. It is recommended to
leave at least 4’’ [102] clearance between the wall
and the cabinet to ensure the full opening of the
door.
□
Plus 18-13/16’’ [478] to the height (H1), this
calculated measure is the distance of the bottom of
the support bar (A) to the floor, as illustrated below.
Mark the bottom position of the support bar (A) on
the wall.
H1
4’’ [102]
1’
’ [25]
