4
Assembly
1
Adhering the basins
2
3
Sealing the basins
4
Applying the silicone
□
Apply a layer of silicone on the underside of the top (B)
along each basin cutout, where the basins (C) will be in
contact.
Lower each basin (C) onto the top (B), lining it up with the
cutout.
Wipe away any excess silicone.
□
□
B
C
C
CAUTION:
Do not over tighten the screws as this
could crack the basin.
□
Position the brackets (BB) so they clamp the basin (C) edge
to the top (B).
Thread the screws (AA) through the spaces in the brackets
(BB), then through the anchor in the top (B).
Tighten the screws with a screwdriver, turning it clockwise.
□
□
Securing the basins
□
Apply a bead of silicone sealant where the basins (C) meet
the top (B).
Use a clean rag to push in the silicone and wipe away
any excess.
□
□
Wipe off the top edges of the vanity (A) that will be in
contact with the top using a clean rag.
Apply a layer of silicone along all of the top edges.
□
A
B
C
B
C
BB
AA
