S
T
E
P
1
S
T
E
P
2
• When properly installed, this hardware can provide
protection against the unexpected tipping of furniture.
• Attach one of the mounting brackets “D” securely to
the back top edge of the unit using the short screw “E”.
• Mark the location on the wall for mounting the second bracket "D".
Drill the appropriate sized hole in the wall and insert the plastic screw anchor "C".
Then secure the bracket to the wall using screw "B".
• Place the unit so the bracket on the back edge of unit is in line with the bracket on the wall.
Instructions
Tipping restraint
B
D
C
D
E
A
• Lace the end of the nylon restraint strap “A” through
each bracket. Bring both ends together and slide the beaded
end of the strap through the keyhole shaped slot on the other
end. Pull down on the beaded end until it snap-locks into the keyhole.
• Check to make sure the strap is securely laced and locked to the brackets.
TIPPING RESTRAINT
HARDWARE
1
1
Ø6
1
1
2
•
•
•
•
•
1 nylon strap
1 ½”screw
1 plastic screw anchor
2 wall brackets
1 small screw
