Pre-Installation
PLANNING INSTALLATION
To ensure your installation goes smoothly, please read these instructions carefully and review the recommended tools
and hardware before you begin.
To remove the previous or original vanity (if applicable): 1) Turn off the water supply and drain out. 2) Disconnect the
supply lines from the faucet. 3) Remove the previous or original vanity top and vanity. If the new vanity is not installed
immediately, temporarily stuff a rag into the drain pipes.
Using a level, locate any uneven floor and/or wall areas where your vanity will be installed. Unevenness can
cause your vanity to become misaligned resulting in twisting of the cabinet. Repair any uneven areas by reducing
high spots or shimming low spots.
PACKAGE CONTENTS
HARDWARE CONTENTS
Touch-Up Pen
Qt
y
:
1
AA
TOOL REQUIRED
Sealant
3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Part
Description
Quantity
A
Vanity
1
B
Top (pre assembled to Vanity (A)
1
C
Backsplash
1
