A
AA
A
AA
BB
4
Assembly
1
Preparing the wall
2
3
Hanging the vanity
4
Adjusting the levels
□
Installing the bracket
□
□
□
□
Measure a vertical distance of 30-3/4" from the floor using
a tape measure, and mark on the wall with a pencil.
This will be the height of the wall bracket (AA).
Place the wall bracket (AA) against the wall at this location.
Ensure it’s horizontally straight by using a level.
Insert the screws (BB) through the bracket (AA) holes and
screw them into the wall with the screwdriver.
Lift the vanity (A) above the bracket (AA) and place it
against the wall.
Slide the vanity (A) to the left or right to the desired location.
Slide the vanity (A) down the wall, hooking it onto the
bracket (AA).
Adjust the top bolt (1) to tilt the vanity (A) from front to back.
Adjust the bottom bolt (2) for leveling the vanity (A) left or right.
After all adjustments are completed, replace the plastic cap.
□
□
□
30-3/4"
35"
1
2
