8
Assembly (continued)
3
Attaching the upper beam and bottom
beam
4
Attaching the gas cylinder support
□
□
NOTE
: Do not tighten bolts completely until assembly is
complete.
□
NOTE
: Do not tighten bolts completely until assembly is
complete.
5
6
□
NOTE
: Do not tighten bolts completely until assembly is
complete.
□
NOTE
: Do not tighten bolts completely until assembly is
complete.
Attaching the door
Attaching the handle assembly
F
J
H
K
CC
AA
BB
B
C
L
CC
AA
BB
J
K
D
AA
BB
CC
O
D
O
Attach the Upper Beam (J) to the Front-Left Leg (H) and the
Front-Right Leg (F) with four Bolts (AA) and four Washers (BB)
using the Hex Screw Driver (CC).
Attach the Bottom Beam (K) to the Front-Left Leg (H) and the
Front-Right Leg (F) with four Bolts (AA) and four Washers (BB)
using the Hex Screw Driver (CC).
Attach the Gas Cylinder Support (L) to the Right Panel (B) and
the Left Panel (C) with four Bolts (AA) and four Washers (BB)
using the Hex Screw Driver (CC).
Attach the Door (D) to the Upper Beam (J) and the Bottom
Beam (K) with two Bolts (AA) and two Washers (BB) using the
Hex Screw Driver (CC).
Un-screw the Handle Assembly (O). Attach the Handle (O) to
the Door (D) using a Phillips screw driver to secure tightly.
