6
Assembly (Continued)
3
Assembly Stretcher to Base
–
P2
□ Assembly Stretcher (D) to Base (C) by slightly
tighten Threaded Rod (FF), Half Moon Washer
(CC), Hex Nut (DD) with Wrench (EE) provided.
(Reference Fig.4)
NOTE:
Tight Slightly till the whole Bench set in.
4
Assembly Pedestal to Bench
Top
– P1
□ Place Bench Top (A) upside down on a soft
surface such as blanket or carpet to prevent it from
being scratched.
□ Place Pedestals (B) into
square blocks
under top.
(
Reference Fig.5)
□ Tighten Bolts (AA) by Allen Key (BB) from top
support rail through Pedestal (B) as shown.
(Reference Fig.5)
□ Do same above steps for 3 sides.
(Reference Fig.6)
□ Do same above steps for another Pedestal.
NOTE:
Tight slightly till all bolts are completely in
each hole. Then tighten before turn Bench over.
B
A
C
D
AA
BB
AA
BB
D
B
FF
C
D
B
FF
GG
CC
DD
D
B
C
1
2
3
CC
DD
Fig.4
Fig.5
B
A
C
D
AA
BB
Fig.6
