6
Installation (continued)
3
Threading the wire
□
Thread the wire (BB) through the eyelet of one D-ring to the
opposite D-ring and back to the beginning point.
□
Cut any excess wire (BB) and knot it to secure to the eyelet
of the D-ring.
□
Cover the sharp edges with electrical tape.
4
Hanging the mirror
□
Measure 6 in down from the top mark on the wall and 12 in
right from the same mark.
□
Make sure the mirror (A) is at least 1 in. above the faucet.
□
Drill a pilot hole. This will be used to anchor a wood screw
(AA) to hang the mirror (A).
□
Hang the mirror (A) by the metal wire (BB).
Loose lark’s head shows
pattern of threading
Pull knot tight
Twist loose end into tight
and wrap snug against
knot