6
Making the electrical connections
Assembly — Hanging the Fan (continued)
10
If you feel you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.
□
Disconnect the power and remove the existing wall plate and switch from the wall outlet box.
□
Set the knob on the wall switch (K) to the” “position.
□
Make wire connections as follows using the wire nuts (AA).
a.
Connecting the wires from the fan to the wires from the ceiling outlet box.
1. Connect the red wire form the ceiling outlet box to the blue wire from the ceiling fan.
2. Connect the black wire from the ceiling outlet box toe the black wire form the ceiling fan.
3. Connect the white wire from the ceiling outlet box to the white wire from the ceiling fan.
4. Connect the green wires from the bracket and down rod to the ground conductor wire on the ceiling box.
WARNING:
To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring.
NOTE:
Installation of this fan requires that a three-conductor cable with ground wire be run between ceiling and wall outlet box (VV).
Blue
Red
Green
White
White
Ground
conductor
Black
Black
K
VV
Line Voltage
(Black wire from main fuse box)
Ground
Black
Red
Black
Black/white
Yellow/green
Blue
White
(Neutral)
b.
Connecting the wires from the switch to the wires from the wall outlet box.
□
Make wire connections as follows using the wire nuts (LL).
1. Connect the blue wire from the switch to the red wire from the wall outlet box.
2. Connect the black wire form the switch to the black wire form the wall outlet box that feeds up to the fan.
3. Connect the black / white striped wire from the switch to the black LINE VOLTAGE wire from the outlet box that
feeds back to the main fuse box.
4. Connect the yellow / green striped wire form the switch to the ground terminal on the wall outlet box.
WARNING:
Incorrectly connecting the black wires will cause the fan to not work and may damage the switch.
1
2
3
4
