12
Assembly (continued)
15
Attaching the back panels
□ Pick up the upper back panel (D) and align the drilled holes against the upper long edge with the pilot holes on
the back stretcher of the top panel (A). Attach the upper back panel (D) in place using the provided washer head
screws (EE).
□ Align and attach two lower back panels (H) to the lower side panels (I and L) and partition panels (J and K) with
the provided washer head screws (EE), using the pilot holes as a guide.
16
Attaching the adjustable shelves and cam lock
covers
□ Stand the assembled unit upright.
□ Insert four shelf pins (JJ) into the desired holes inside each side compartment. Make sure you place the 4 shelf
pins in the same level so the shelf is not tilted. Tilt and rest the adjustable shelves (O) onto the shelf pins (JJ).
□ Plug the cam lock covers (II) onto the visible cams locks to conceal the cams.
H
H
EE
D
O
O
JJ
JJ
II
J
K
I
L
A
M
M
P